Home Forums Regional Knowledge Network Korad kd3005p programming manual

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Lalli
    Guest
    Post count: 3949

    .
    .
    Download / Read Online Korad kd3005p programming manual
    .
    .
    .

    .
    Welcome to DONGGUAN KORAD TECHNOLOGY CO. F9, Building D2, Kechuang Center, Songshan Lake Intelligent Valley, No. Yanhe North Road, Liaobu Town, Dongguan City, 523000, Guangdong Province, P. RS232, which makes the remote communications much more convenient and faster. And the 2 adjustment modes of the encoders satisfy various operation habits of users. The models of this series are up to 10 kinds and the power range is from 90W to 300W. This product is currently out of stock! Please correctly fill out all mandatory items! The verification code you entered is incorrect or has already expired. Strive to become the most satisfied instrument and equipment supplier for all users. Linux graphical user interface for Korad KD3005P power supply. Python and Tkinter based GUI for the KD3005P programmable power supply. This is stored in a configuration file and from then on the power supply is plug and play. Plug and play operation eliminates need to find virtual TTY port. Full front panel functionality with additional displays such as current and voltage settings. Q 636,1375 634,1350 612,1121 449. Q 1138,1373 1137,1348 1125,1133 1036,939. L 0,64 Q 0,36 20,18 38,0 64,0 l 3,0 Q 329,13 568. Thanks for helping keep SourceForge clean. You seem to have CSS turned off. This download has been scanned for malware. All downloads on SourceForge are scanned for malware. Series User ManualSHENZHEN KORAD TECHNOLOGY CO. F3, Building A4, District B, Songbai Industrial Park,Guangming New District, Shenzhen, 518106, P. Returns the POWER SUPPLY status. Returns the KA3005P identification. Memory number 1 to 5Example RCL1 Recalls the panel setting stored inmemory number 111. SAV1 Stores the panel setting in memorynumber 112. Do not block or obstruct the cooling fan vent opening. Avoid severe impacts or rough handling that leads todamage. Do not discharge static electricity . Do not disassemble unless you are qualified asservi ce perso nnel. Connect the protective grounding conductor of the ACpower cord to an earth ground, to avoid electricalshock. To ensure fire protection, replace the fuse only with the specified typeand rating. Disconnect the power cord before fuse replacement. Make sure the cause of fuse blowout is fixed before fuse replacement. Series User ManualKA Series Remote Control Syntax V2. KD3005D DIGITAL_CONTROL DC POWER SUPPLYOCPOver Current Protection ActiveC . VTO AVOID ELECTRIC SHOCK, THE POWER CORD PROTECTIVEGROUNDING CONDUCTOR MUST BE CONNECTED TO GROUND. FOR CONTINUED FIRE PROTECTION, REPLACE FUSE WITH 250V FUSE OF THESPECIFIED TYPE AND RATING. REFERSERVICING TO QUALIFIED PERSONNEL. Power SocketUSB InterfaceRs232 InterfaceDISPLAYVoltage levelCurrent levelVAVoltmeter displays the setup value of outputvoltage . Displays the setup value of output current . Response time 50msSets the CH1 output current to 2. Returns the output current setting. Returns the CH1 output current setting. Returns the output voltage setting. Returns the CH1 voltage setting5. Returns the actual output current. Returns the CH1 output current6. Returns the actual output voltage. LED Panel LightsSet up the COM port inside the PC according to thefollowing list. OCPOver Current Protection indicator. When the power supplyis in OCP mode this light is on. When the power supply isin constant current mode, this light is on. When the power supply isin constant voltage mode, this light is on. NoneVoltage and Current Adjustment Knob OperationThere are 3 adjustment modes for the voltage and current levels, that is, Mode 1and Mode 2. Before setting, push the knobs to adjust the voltage andcurrent levels. And these 2modes can be shifted by pushing the voltage adjustment knob and the currentadjustment knob at the same time and holding for 2 seconds. Manufacturer, model name, software version. Push the voltageadjustment knob and then the voltage meter willflicker, when voltage output can be changed byadjusting the knob. T hen the resolution of the knobrotation can be changed. And push the knob again whenthe meter flikers, then the resolution of the knobrotation can be changed. Series User ManualSpecificationsMode 2 Continuous Adjustment ModeIn mode 2,rotate the adjustment knobs to adjust thevoltage and current values. The default of thevoltage initial settings is 1v while that of the currentis 100mA. The voltage and current levels can bechanged by pushing the knobs. ALoad RegulationOperation of Over Current ProtectionCURRENTpress and hold for 3 seconds to start OCP mode, wherethe output will be cut off when the output current reachesthe set value. In the OCP mode, rotate this knob to recoverthe output. V1 mACurrentMode 3Remote Control ModePush and hold the VOLTAGE knob for 3 seconds to lockthe VOLTAGE and CURRENT adjustment knobs. Then theoutput of the power supply will be off. CURRENT knob and then the output of the powersupply will be ON and OFF accordingly. Push and hold theVOLTAGE knob again for 3 seconds and the VOLTAGEand CURRENT adjustment knobs will be unl filexlib.
    .
    Korad kd3005p programming manuel
    Korad kd3005p programming manualidades
    Korad kd3005p programming pdf
    Korad kd3005p programming manuel
    Korad kd3005p programming gebruiksaanwijzing

Viewing 1 post (of 1 total)
Reply To: Korad kd3005p programming manual
Your information: