Home Forums Regional Knowledge Network Stihl ms290 manual

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Gardemeister
    Guest
    Post count: 23451

    Stihl ms290 manual
    .
    .
    Download / Read Online Stihl ms290 manual
    .
    .
    .

    .
    Instruction Manual Manual de instruccionesMS 290Warning! Special Accessories 58 Ordering Spare Parts 58 Maintenance and Repairs 58STIHlMS 290, MS 310, MS 390STIHL Incorporated Federal Emission Control Warranty Statement 59 Trademarks 61Allow only persons who understand this Manual to operate your chainsaw. If the operating characteristics or the appearance of your machine differ from those described in this manual, please contact your STIHL dealer for assistance. Therefore some changes, modifications and improvements may not be covered in this manual. Different models may have different parts and controls. See the appropriate section of your instruction manual for a description of the controls and the function of the parts of your model. Safe use of a chainsaw your doctor before operating this machine. A dull chain will increase cutting time, and pressing a dull chain of the STIHL unit produces parts of the unit. Secure hair so it is above shoulder level. Wear sturdy boots with nonslip soles. Chainsaw noise STIHL offers a wide range of protective clothing and equipment. Main Parts STIHL servicing dealer. The screwdriver end of the STIHL combination wrench or other similar tool can be used as an aid in tightening slotted fuel filler caps. STIHL Oilomatic chain, guide bar and sprocket must match each other in gauge and pitch. If you cannot set the correct idle speed, have your STIHL dealer check your power tool and make proper adjustments the bar and chain from skating or your hand or any other part of your body. Never hold the chain to strike the operator. Working conditionsOperate and start your power tool only outdoors in a well ventilated area. Operate it under good visibility and daylight conditions only. It is designed to reduce the risk of personal injury in the event of a thrown or broken chain. From time to time, the catcher may be damaged or removed. To reduce the risk of personal injury, do not operate a chainsaw with a damaged or missing chain catcher. If you experience loss of performance and you suspect a clogged screen, have your muffler maintained by a STIHL servicing dealer. STIHL Quickstop chain brakeSTIHL has developed a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a Quickstop chain brake. The Quickstop chain brake is standard equipment on your STIHL chainsaw. STIHL Quickstop chain brake for both experienced and inexperienced chainsaw users. Always cut with a properly sharpened chain. STIHL green labeled low kickback chains. When used with other, more aggressive chains, these bars may be less effective in reducing kickback. Do not mount a bow guide on any STIHL chainsaw. Do not cut more than one log at a time. Do slope, the operator should stand on the uphill side if possible. Cut to no more than width of guide bar. Hingechainsaw directly behind the location of the intended hinge and pivot the saw around this point only as far as the hinge. The bumper spike rolls against the trunk. For the sectioning method make the first part of the felling cut with the guide bar fanning in toward the hinge. Next, align the saw in the direction in which the recess is to be cut. With the saw at full throttle, insert the guide bar in the trunk. When the tree hangs or for limbs with the nose of the guide bar. Never permit another person to hold the log. Never hold the log with clear area before cutting. Pull out exposed and cleared logs first. Keep the chain at proper tension. Tighten all nuts, bolts and screws except the carburetor adjustment screws after each use. A new chain has to be retensioned more often than one that has been in use for some time. The service life of the chain and guide bar depends on the quality of the lubricant. It is therefore essential to use only a specially formulated chain lubricant. Always check chain lubrication and oil level in tank before starting work. Every new chain has to be broken in for about 2 to 3 minutes. The hand guard must be free from dirt and move freely. Lift off the carburetor box cover tothe rear. Refit carburetor box cover and secure it with the twist lock. This is essential to avoid engine running problems, i. Bystanders must be well clear of the general work area of the saw . Put your right foot into the rear handle and press down. Always disengage the chain brake before opening the throttle. Slacken off the chain if you have retensioned it at operating temperature during cutting work. Minimum off the carburetor box cover to the rear. Clean away loose dirt from around filter. General informationThe carburetor comes from the factory with a standard setting. With this carburetor it is only possible to adjust the engine idle speed within fine limits! Erratic idling behavior, poor accelerationIdle setting is too lean. These factors cause deposits to form on the insulator nose which may result in trouble in operation. Unfavorable running conditions, e. Fit a new spark plug after injury, use only spark filexlib.
    .
    Stihl ms290 user guide
    Stihl ms290 manualidades
    Stihl ms290 كتيب
    Stihl ms290 manualidades
    Stihl ms290 notice

Viewing 1 post (of 1 total)
Reply To: Stihl ms290 manual
Your information: